AIRx 20x25x4RP-DUST | Our#: 200809
Replacement for Aprilaire® # 210, 213 Filter - MERV 8, 2-Pack
AIRx 20x25x4RP-DUST | Our#: 200809
- Fast Shipping & Free Returns
- 100% Compatibility Guarantee
Enjoy a cleaner home with less work
- Reduces dust, lint, dust mites, pollen
- Will help keep your HVAC system clean
- Maintains superior airflow
- Creates cleaner indoor air
- Actual Dimensions: 20 ¼" x 25" x 3 ½"
3 people in your area recently purchased this product!
- Fast Shipping & Free Returns
- 100% Compatibility Guarantee
Frequently Purchased Together
Product Details
Aftermarket replacement for Aprilaire® part numbers # 210, 213. This high-quality pleated filter fits Aprilaire® branded whole house air purifiers - capturing airborne particles and keeping your furnace or air conditioning system clean.
- MERV 8 filtration traps common airborne allergens including dust, pollen, mold spores, pet dander, and other fibers
- Low cost alternative to expensive factory filters
- Innovative gasketing provides an airtight seal against all 3 sides of the air cleaner cabinet and door
- Deep pleat design creates minimal airflow resistance
- Fits Aprilaire® whole-house air purifier models: 1210, 1620, 2210, 2216, 3210, 4200
- Easy installation - just slides in with no assembly
- Nominal Dimensions: 20" x 25" x 4"
- Actual Dimensions - 20-1/4" X 25" X 3-1/2" (approximately 21-1/4" X 26" including gaskets)
- Made with pride in the USA
Aprilaire® is a registered trademark of Research Products Corporation. This product is not made by Research Products Corporation. Any use of the Aprilaire® brand name or model designation for this product is made solely for purposes of demonstrating compatibility.
Do you want to know about the technical specs?
Replaces These Filters:
Fits In These Systems:
How to change your furnace/air-conditioner/HVAC air filter
Estimated time: 10 minutes or less
Steps
Determine the location of your filter
Your forced air system will be similar, whether or not it is a heating (furnace) or cooling (AC) system – or both. The furnace filter housing/slot is located right next to the heating/cooling system’s air handler or blower. Your filter(s) may also be located in a return grille on the wall or ceiling of your home.
Determine the type/size of filter that you use
Typically, the dimensions or part number of the filter will be printed on the filter frame. Use this information to order a new filter.
Purchase a new air filter from DiscountFilters.com
Visit DiscountFilters.com and purchase a new filter. Use our filter finders to verify the correct match.
Remove the old filter
Turn off the power to the heating/cooling system and remove the old filter from its housing/slot and discard.
Insert the new filter
Pay attention to any airflow direction arrows printed on the frame of the new filter. Install the filter by sliding it into the filter housing/slot with the airflow arrow pointing towards the blower. If installing the filter in a wall or ceiling grille – the airflow arrow should point towards the wall or ceiling. Turn on the power to the forced air system.
Enjoy cleaner air!